|
GEC series small driving force air valve actuators
Application scope:
This product is a electric air valve actuator, it’s mostly apply in air valve actuator’s switch and opening control on air conditioning or ventilating duct.
Product specification:
+ Output torque: 6~10N•m;
+ Output angle scope: 0~90 degree;
+ Working voltage: 24VAC/DC 230VAC;
+ Control signal: switch quantity/simulation quantity (0~10V或4~20mA can be selected).
|
|
GEC series big driving force air valve actuators
Application scope:
This product is a electric air valve actuator, it’s mostly apply in air valve actuator’s switch and opening control on air conditioning or ventilating duct.
Product specification:
+ Output torque: 10~40N•m;
+ Output angle scope: 0~90 degree;
+ Working voltage:24VAC/DC 230VAC;
+ Control signal: switch quantity/simulation quantity (0~10V或4~20mA can be selected).
|
|
GEC series electric regulating water valves and drivers
1、GEC series electric regulating valves widely apply in air conditioning, refrigeration, heating, building and so on automation system. at the same time, apply in chemical industry, petroleum, metallurgy, electric power, light industry and so on industry which production process automation and remote control system;
2、GEC series electric regulating valves can regular cold/hot water, steam flux, achieved control temperature, humidity, pressure and saving energy goal. GEC series electric regulating valves can apply in low temperature medium（glycol and so on）operating mode, for example, cold storage's temperature control system;
3、GEC series electric regulating valves volume is small, weight is light, uses standard flange connection, easy installation. Its structure conforms to the IEC international standard;
4、Electric direct single seat regulating valve has a valve seat and a valve which has plug style valve core, has good closure performance merit, is suitable to valve seat divulging rate request strict situation. Because of valve structure, imbalance force on the valve lever is big, is especially obvious in nominal diameter big situation. Thus the valve both sides work differential pressure is not suitable excessively high;
5、Electric balance regulating valve，because valve uses balance -like structure, thus balance force on valve lever is not very small, stability is good, is suitable for the valve both sides differential pressure high situation, because valve core has sleeve's side guidance, has vibration by turbulent flow and impact to weaken, has noise to be low, cavitation is small, life is long and so on merit. Because of it’s structure, sleeve regulating valve assembling and dismantling service is convenient, just valve seat divulging single-seat is a kind of big;
6、Electric three-way regulating valve, is suitable for allocated proportion adjustment or by-pass regulation, for example uses adjusting fluid temperature on heat interchanger, divides into two groups export fluid from one group import fluid, or merges a group export fluid from two groups import fluid, compares with single-seat valve, composing similarly system, could save a valve, make system simplification.
|
|
GEC-500N electric water valve drive
Product specification:
+ Operation/control: Reversible, increase control;
+ Working voltage: 24VAC ±10% ;
+ Control signal: The switch quantity/simulation quantity (0~10V or 0~5V or 5~10V can be elect);
+ Electrical machinery form: Synchronized static type is reversible;
+ Electrical machinery electricity rated value nominal value (max): 24VAC 50/60Hz 2.4W(2.7W);
+ Electric circuit power loss:1W;
+ Driving force: 500N;
+ Material quality: Gear- nylon, support abutment- galvanization steel plate, support – presses cast aluminium, hat cover-ABS engineering plastics;
+ Full travel time: When 50Hz,10mm traveling range is 100s，when 60Hz,10mm traveling range is 85s;
+ Driver maximum traveling range: 20mm;
+ Ambient temperature scope: Work:-5~+55℃，storage: -20~+65℃.
|
|
GEC-1000N electric water valve drive
Product specification:
+ Operation/control: Reversible, increase control;
+ Working voltage: 24VAC ±10% ;
+ Control signal: The switch quantity/simulation quantity (0~10V or 0~5V or 5~10V can be elect);
+ Electrical machinery form: Synchronized static type is reversible;
+ Electrical machinery electricity rated value nominal value (max): 24VAC 50/60Hz 2.7W(5.5W);
+ Electric circuit power loss:1W;
+ Driving force:1000N;
+ Material quality: Gear- nylon, support abutment- galvanization steel plate, support – presses cast aluminium, hat cover-ABS engineering plastics;
+ Full travel time: When 50Hz ,13mm traveling range is 55s，when 60Hz,13mm traveling range is 44s;
+ Driver maximum traveling range: 20mm;
+ Ambient temperature scope: Work:-5~+55℃，storage: -20~+65℃.
|
|
GEC-1800N GEC-3000N electric water valve drive
Product specification:
+ Operation/control: Reversible, increase control;
+ Working voltage: 24VAC ±10% ；
+ Control signal: The switch quantity/simulation quantity (0~10V or 0~5V or 5~10V can be elect);
+ Electrical machinery form: Synchronized static type is reversible;
+ Electric circuit power loss:10W；
+ Driving force:1800N，3000N；
+ Material quality: Cast and press aluminum, steel plate;
+ Entire journey running time: 128s；
+ Driver maximum traveling range: 20mm；
+ Ambient temperature scope: Work:-5~+55℃，storage: -20~+65℃. |
|
GEC-5000N electric water valve drive
Product specification:
+ Operation/control: Reversible, increase control;
+ Working voltage: 24VAC ±10% ；
+ Control signal: The switch quantity/simulation quantity (0~10V or 0~5V or 5~10V can be elect);
+ Electrical machinery form: Synchronized static type is reversible;
+ Electric circuit power loss:15W；
+ Driving force:5000N；
+ Material quality: Cast and press aluminum, steel plate;
+ Entire journey running time: 128s；
+ Driver maximum traveling range: 20mm；
+ Ambient temperature scope: Work:-5~+55℃，storage: -20~+65℃. |
|
GEC-16000N electric water valve drive
Product specification:
+ Operation/control: Reversible, increase control;
+ Working voltage: 24VAC ±10% ；
+ Control signal: The switch quantity/simulation quantity (0~10V or 0~5V or 5~10V can be elect);
+ Electrical machinery form: Synchronized static type is reversible;
+ Electric circuit power loss:20W；
+ Driving force:16000N；
+ Material quality: Cast and press aluminum, steel plate;
+ Entire journey running time: 128s；
+ Driver maximum traveling range: 20mm；
+ Ambient temperature scope: Work:-5~+55℃，storage: -20~+65℃. |
|
GEC series stainless steel thread valves
|
|
GEC series brass thread valves
|
|
GEC series cast steel flange valves
|
