GEC2410 development board packages introduction

8.4 " LCD screen	3.5 " LCD screen

GEC2410 development board hardware constitution
Hardware function introduction:
◆ Uses Samsung company S3C2410, main frequency may reach 203MHz;
◆ 64M bytes SDRAM, is composed by two piece of K4S561632, works under 32-bit mode;
◆ 64M bytes NAND Flash, using K9F1208, may compatible 16M. 32M or 128M bytes;
◆ 10M Ethernet interface, using CS8900Q3, with transmission and connection indicating lamp;
◆ LCD and touch screen interface;
◆ 2 USB HOST, in S3C2410 sets, conforms to USB 1.1, pays attention to these two USB HOST interface is duplicate uses;
◆ 1 USB Device , in S3C2410 sets, conforms to USB 1.1;
◆ Support audio input and output, audio module is composed by S3C2410 IIS audio bus interface and UDA1341 audio codec, on the board also integrated MIC, with to audio input;
◆ 2 UART serial port, the baud rate may reach as high as 115200bps, and has the RS232 level switching circuit;
◆ SD Card interface, compatible SD Memory Card Protocol 1.0 and SDIO Card Protocol 1.0;
◆ Embedded-ICE (20 feet standard JTAG) interface and parallel JTAG interface, supports ADS, SDT software downloading and debugging, Flash Writing;
◆ Serial EEPROM: AT24C02 4Kbytes EEPROM, IIC interface;
◆ Buzzer, 4 LED lamp;
◆ 16 buttons;
◆ Switching power supply, distributional power supply, 3V lithium battery, provides in CPU to set at RTC to manage the power.

GEC2410 CD-ROM development tools and source code
1) test the source code, start guide source code BIOS and downloading writing tools sjf2410.exe;
2) Linux for 2410 kernel source code package and kernel cross compiler tool, root filing system and root filing system manufacture tool mkcramfs;
3) Qt-embedded-2.3.7 and qtopia-free-1.7.0 source code, Application program cross compiler;
4) WINCE4.2.NET board support package BSP for 2410，and has compiled WINCE mirror image document;
5) GEC2410 and some expansion chips of the board;
6) GEC2410 floor board and core board circuit diagram (PDF format);
7) GEC2410 development board user handbook (PDF format);
8) Some practical tools, such as the DNW Serial tool.

Packages include
1) Have tested a GEC2410 development board (including core board and peripheral floor board);
2) GEC2410 user CD-ROM;
3) Touch screen 3.5 "TFT colored LCD board (selective);
4) A serial cross wire (both are carriers first);
5) A wire (cross-wire);
6) A USB wire;
7) Touch pen (to select and match together with LCD screen);
8) A DC power supply +12V/1A
9) A packet

Operating system support driver
GEC2410 development board supports WINCE and Linux embedded operating system.

Embedded Linux operating system:
◆ Uses above linux2.4 kernel
◆ Supports the many kinds of filing system, as CRAMFS,FAT as well as uses in NAND FLASH YAFFS filing system and so on
◆ Supports LCD and touch screen
◆ Supports USB HOST
◆ Supports QT
◆ Supports MP3 play and the video play
◆ Supports many kinds of network application, like FTP, HTTP, the Telnet and so on network application

Embedded WINCE operating system:
◆ Supports LCD and touch screen
◆ Supports USB HOST
◆ Supports audio
◆ Supports Serial 1
◆ Supports network
◆ SD card